![]() USB cable for HDMI to USB converter, USB 3. HDMI to USB 3.0 converter for content ingestĮDID emulator for UC Engine display output The box may be used for an AC outlet or a wall plate containing AV and data jacks. The HD-CONV-USB-250 is an AV and HDMI® over CAT5 to USB Converter that is part of a Crestron Flex UC Video Conference System with Bring Your Own Device (BYOD) capabilities. The device captures uncompressed 1080p60 video with stereo digital or analog audio. To manage wiring and conceal connections for a clean, secure installation, a 1-gang sized cutout at the lower right-hand corner allows for mounting over a flush wall-mounted electrical box. The Crestron HD-CONV-USB-300 converts an HDMI® signal to USB 3.0. The assembly bracket includes mounting holes on its left and right side edges, spaced at 100, 200, and 300 mm vertically, to allow for attachment to either side of a mounting plate on the rear of a display. Attachment to the display is accomplished using two of the four bolts that also affix the display to a VESA® compliant display mount. The complete assembly can be mounted on the wall, or it can be attached to the rear of the display device. The UC Engine Assembly (UC-BRKT-100-Z-ASSY) streamlines the installation of a Crestron Flex UC system by incorporating the UC-ENGINE-Z, HD-CONV-USB-200, and UC-CONN-HD together on one convenient mounting bracket. Product information for HDMI to USB 3.0 Converter HD-CONV-USB-200 manufactured by Crestron Electronics, Inc. Single-gang cutout accommodates an AC outlet or AV/data jack (in-wall box or mud-ring required).UC-ENGINE, HD-CONV-USB-200, and UC-CONN-HD. Includes VESA® 100, 200, or 300 mounting holes for left or right side mounting to the back of the display UC Engine Assembly (UC-BRKT-100-ASSY) streamlines the installation of a Crestron UC system by assembling the.Mounts cleanly to the wall or behind a display device.Multiple cable tie points with reusable cable ties.Security covers conceal and protect connections.Preassembled mounting bracket with UC Engine, HDMI® to USB Converter, and EDID Emulator.Designed for use with a Crestron Flex UC system solution. All the central components of a Crestron Flex UC system, assembled together on a bracket and ready to mount behind the display device.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |